Sensaphone 1400 - Manual (Page 61)

Chapter 5: Communication Programming
59
4. Enter the phone number using the number keys, and then
press ENTER. Be sure to enter “1” + area code if required. If
installed on a PBX system, be sure to enter a “9” if required.
1400 will say “OK.”
To play back a programmed dial-out telephone number:
1. Press the WHAT IS key
2. Press the PHONE NUMBER key. 1400 will say “Enter
Number.”
3. Select an assigned Phone number (keys 1–8).
The 1400 will recite the number programmed. If there is no number
programmed, 1400 will say “No number.”
To erase a dial-out telephone number:
1. Press the SET key.