Sensaphone 1400 - Manual (Page 63)

Chapter 5: Communication Programming
61
To program a NUMERIC PAGER using AUTOMATIC Mode:
1. Press the SET key
2. Press the PHONE NUMBER key. 1400 will say “Enter Number.”
3. Select which Phone number to program. Press any unassigned
number key (keys 1–8) to represent the new telephone number
entry. 1400 will respond “Enter number.”
4. Press CODE 1 (This tells 1400 this is a Numeric Pager call).
The 1400 will say “Pager.”
5. Enter the pager number using the number keys. Then press
ENTER.
The 1400 will say “OK.”