Sensaphone 1400 - Manual (Page 55)

Chapter 5: Communication Programming
53
To play back the ID Message:
1. Press the WHAT IS key.
2. Press the MESSAGE key.
3. Press the ID key (number 0 key).
The 1400 will play back your recorded message.
The Zone Messages are used to identify the device or condition
being monitored such as temperature, humidity, equipment alarms,
security alarms, etc.
To program the Voice Message for a Zone:
1. Locate the condenser mic.
2. Press the SET key.
3. Press the MESSAGE key. The 1400 will say, “Enter Message
Number.”