Sensaphone 1400 - Manual (Page 71)

Chapter 5: Communication Programming
69
3. Press a number (1–8) to assign the user.
The 1400 will say “Enter code.”
4. Enter the additional four digits of your personal code.
The 1400 will say “OK.”
To play back an Acknowledgment Code:
1. Press WHAT IS
2. Press CODE
3. Press an assigned number entry 1–8.
The 1400 will recite the Acknowledgment Code for the selected
telephone number entry.
Note: In default Single-User mode, the unit will
announce “555” immediately after pressing the
CODE key.