Sunnex PF Series (MRI) - Manual (Page 11)

Sunnex PF Series MRI Service & Installation Manual
11
CAUTION
1. IN CASE YOU NEED TO DETACH MALE CONNECTOR FROM
FEMALE CONNECTOR OF POWER SUPPLY, YOU MUST FIRST
“PUSH” ON THE TAB OF FEMALE CONNECTOR AND THEN PULL
THE MALE CONNECTOR OUT.
2. PULLING THE MALE CONNECTOR FIRST, WITHOUT “PUSHING”
THE TAB ON FEMALE CONNECTOR MAY MAKE THE
CONNECTION TIGHT.
3. IF THE CONNECTION FEELS TIGHT, [1] PRESS ON THE MALE
CONNECTOR FIRST, [2] “PUSH” ON THE TAB OF FEMALE
CONNECTOR AND HOLD [3] PULL THE MALE CONNECTOR OUT.
6. Confirm connection through the RF panel into the light fixture in the MRI
room.
7. Plug electrical box lead into a hospital grade electrical socket.
8. Lamp is ready for use.
Figure 3. Schematic for option 1 (Installing the transformer box outside
MRI room using RF filter)
PF MRI
Power
Supply RF Filter
Celestial Star MRI
Ceiling Light
From RF
filter to MRI
Light
Output from
Transformer Box
to RF Filter
Hospital Grade
Cord with Plug
RF Panel
PF MRI MOBILE LIGHT
MRI ROOM