Sunnex PF Series (MRI) - Manual (Page 5)

Sunnex PF Series MRI Service & Installation Manual
5
• The safety guidelines of your MRI facility must never be
compromised. If in doubt, consult with your facilities manager on
proper procedures.
3. PF Series MRI Specifications
3.1 TECHNICAL DATA
Power supply:
120V - 60Hz and 230V - 50Hz
Nominal Effect: 120Vac, 60Hz, 50W - 1.5A
230Vac, 50Hz, 50W - 1.0A
Light Source: Halogen bulb - Dichroic 13.8V/50W
Bulb Life: 2,000 hours
Light Intensity: 25,300 Lux/2,350 footcandles at 1 meter
Central Illuminance 19300 Lux
Total Irradiance 131 Watts/m
2
Color Temp: 3,420K
Color Rendering Index: 97
Total Weight:
Mobile 40 lbs / 18 kg
This product is Class I and the mode of operation is suited for continuous
use. Radiated and conducted emissions testing has been completed on the
PF Series lights and for compliance with IEC 60601-1-2 (2001-09) 2nd
edition (EN55011:1991, Group I Class B)
This product does not produce any physiological effects that could harm a
patient. The mains plug on the product is a disconnect device, a mains switch
is not provided.
This product is not suitable for use in the presence of a FLAMMABLE
ANAESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS
OXIDE.
Information about circuit diagrams, component part lists, descriptions, is
available upon request. Requests can be made to engineering department.