Sunnex PF Series (MRI) - Manual (Page 17)

Sunnex PF Series MRI Service & Installation Manual
17
1. Locate fuse holders (2) on the side of the electrical box. Push the fuse
holder while turning it counter clockwise and remove the fuse holder from the
fuse block by pulling it out.
2. Replace fuse with proper replacement fuse.
Fuse Replacement Specifications:
USA : 250V, 2A, Interpower Products – 813MDA-2
Europe: 250V, 1.25A, Interpower Products – 813MDA-1.25
3. Follow procedure in reverse to return lamp to operating condition.
Figure 4. Fuse Replacement
6.4 PREVENTIVE INSPECTION AND MAINTENANCE
Lens in lamp head to be inspected once a month for cleanliness.
6.5 DISPOSAL OF PARTS
Bulbs/fuses: Bulbs and fuses go in normal waste. All glass parts go in
normal waste.
Plastic parts: Plastic parts are to be put in recycling bins.
Transformer box: Electrical and electronic components are to be put in
electrical and electronic waste.
Metal parts: Metal parts go in metal waste.