Sunnex PF Series (MRI) - Manual (Page 6)

Sunnex PF Series MRI Service & Installation Manual
6
Technical Questions
Any technical questions can be directed to Sunnex Inc. phone +1 508 651
0009 or can be written to Sunnex Inc. Engineering Department, 3 Huron
Drive, Natick, MA 01760, USA.
3.2 EMC COMPATIBILITY
Sunnex Inc.
Electromagnetic Compatibility User Information for the PF MRI Light
(PF 28016-M)
WARNING: Medical Electrical Equipment needs special precautions
regarding EMC and needs to be installed and put into service according to
the Electromagnetic Compatibility [EMC] information provided in the
accompanying documents provided in the Appendix.
WARNING: Portable and Mobile RF Communications Equipment can affect
Medical Electrical Equipment.
WARNING: The equipment or system should not be used adjacent to or
stacked with other equipment and that if adjacent or stacked use is
necessary, the equipment or system should be observed to verify normal
operation in the configuration in which it will be used.
NOTE: The EMC tables and other guidelines that are included in the
Instruction Manual provide information to the customer or user that is
essential in determining the suitability of the Equipment or System for the
Electromagnetic Environment of use, and in managing the Electromagnetic
Environment of use to permit the Equipment or System to perform its
intended use without disturbing other Equipment and Systems or non-
medical electrical equipment.
To avoid electromagnetic interference, guidelines in this instructions manual
and guidelines of MRI MUST be strictly followed.
3.3 TRANSPORTATION AND STORAGE