UVP Doc-It Life Science - Manual (Page 37)

Creating Templates
32
selected. If a setting (or group of settings) is not excluded, it can be overridden on the Canon Camera
plug-in before each capture.
Create a New Template
On the Canon Camera Plug-in click on the three dots next to the drop-down Templates menu.
The Capture Templates window will appear.
Click New. The New Template window will appear.
Type a name for the new template and click OK. A new template will be created and then
defaulted to the current settings in the Capture Templates window.
Set each camera setting to the desired value.
On the right hand side, there is a list of features that can be included in the controls. Check the
features (controls) to use in the template. Only those checked will appear in the main capture-
panel.
Click Save (or OK) to save the new template.
Tip: To copy a template, select the template to copy first, then click New. The new
template will use the one selected for initial values.
Creating Colony Templates
Templates allow the user to set parameters for colonies most frequently counted and provides a quick
count of Petri dishes commonly used by the lab.
To save a template in Step 1 of 2: Select Classes, add the desired points and
classes if not already selected) and click the New button in the Template section of
the window.
A new pop-up window will ask for a new Template name.
Type in the new name and select OK.
The Template name window will close and direct back to the Step 1 of 2: Select
classes tab.