UVP Doc-It Life Science - Manual (Page 70)

Performing 1D Analysis
65
1D Analysis Settings
To access analysis settings, go to Analysis > 1D Analysis > Settings > 1D Analysis tab. This tab sets the
following defaults:
Visible 1D analysis objects: Use this window to identify lanes and bands.
Calibration settings: At the request of the user, deletes calibration when changing background
correction.
Mass Units: This feature is for concentration units. The unit of mass that appears is "ng"
(nanograms). Note that by clicking Customize, users may add additional units. Mass units are
weight numbers, relative units or any relational units defined by the user.
Font size: By clicking the buttons for Lane Font Size and Band Font Size, font size can be
changed for the Lane ID, Lane Name and Band ID labels. The font range is from 6 - 20.
Manually Modifying Lanes and Bands
Lanes and bands can be added and edited manually. The following topics can be found in this section.
Add
Move
Resize
Delete
Clear Information
Add Lanes and Bands Manually
LS software allows the user to add lanes and bands manually.
To Add Lanes Manually
On the Analysis > 1D Analysis > Lanes tools > Add lanes or use the 1D Analysis plug-in > Lane
tools then select Add Lane.
Move the cursor over the image. A movable box will appear when the cursor is moved. Simply
move the mouse over the image to the spot to add a lane. If the color of the box is green, a lane
can be placed. If, however, the color is red, there is already a lane at this position and another
lane cannot be placed there. Move the mouse until the box appears green.
Click the left mouse button to place the new lane.
When finished placing the new lanes, click on 1D Analysis > Master Tools > Edit Objects to
disable the Add Lanes tool.
To Add Bands Manually
On the Analysis > 1D Analysis > Band tools > Add bands or use the 1D Analysis plug-in >
Bands tools then select Add Band.