UVP Doc-It Life Science - Manual (Page 72)

Performing 1D Analysis
67
Place the mouse hand over the top or bottom of the band's extents and click and drag the box
border to increase or to decrease the size of the band until the size matches the band seen on
the image
To Resize Bands Using the Lane Profile Graph
Click Analysis > 1D Analysis > Master Tools > Lane Profile Graph, or use the 1D Analysis
plugin > Master Tools > Lane Profile Graph for the graph to appear in a new window.
Ensure that Band Extents is turned on. Under the graph, find the band markers. Drag the
markers to the left or the right to the desired location. Note that the markers on the graph change
position as well.
Click on OK. The Lane Profile Graph closes and the bands are now in their new positions.
To Place Bands Exactly
Click Analysis > 1D Analysis > Master Tools > Edit Objects or 1D Analysis plug-in > Master
Tools > Edit Objects.
Select the band to resize. Control handles will appear at the four corners of the band as red
boxes.
Under the Analysis > 1D Analysis > Bands and then Band Properties. The Band Information
window appears.
In the section of the window labeled Geometry, the numerical values of the Top, Peak and
Bottom of the band may be changed.
Enter the new numbers, click on OK. Now the location and dimensions of the band reflect
precisely the values entered.
Delete Lanes and Bands
Delete Lanes
Click Analysis > 1D Analysis > Master Tools > Edit Objects or 1D Analysis plug-in > Master
Tools > Edit Objects.
Click on the lane to delete. A box will appear around the band with white boxes at the corners.
On the Analysis > 1D Analysis menu, select Lane tools > Delete selected lane(s). Or go to the
1D Analysis plug-in > Lane tools > Delete selected lane(s). A window will pop up to request
confirmation. Click Yes to delete the lane.
Delete Bands
Click Analysis > 1D Analysis > Master Tools > Edit Objects or 1D Analysis plug-in > Master
Tools > Edit Objects.
Click on the band to delete. A box will appear around the band with red boxes at the corners.
On the Analysis > 1D Analysis menu, select Band tools > Delete selected band(s). Or go to
the 1D Analysis plug-in > Band tools > Delete selected band(s). A window will pop up to
request confirmation. Click Yes to delete the band.
Clear All Lane and Band Information
To begin a new analysis of your image, save the existing image with its lane and band
information. Then perform a Save As for the new image, filing it under a new name, and proceed
as follows: