Configuration switches – Rockwell Automation 1203 Serial Communications Module Series B User Manual
Page 14
Advertising
1–6
Product Description
1203–5.5 September 1995
The Serial Communications Module contains three DIP Switches:
SW1, SW2, and SW3 (Figure 1.1 and Figure 1.2). Switches are set
ON or OFF as shown in Figure 1.4. For a detailed explanation of
switch configuration, refer to Chapter 2.
Figure 1.4
Configuration Switches
Side view of typical
switches
Switch designation as
shown in this manual
Rocker switch
Open
Open
Open (Off)
Close (On)
Side switch
Open
Open
Off
On
AB0397A
Configuration Switches
Advertising