Important user information – Rockwell Automation 1203 Serial Communications Module Series B User Manual

Page 2

Advertising
background image

Solid state equipment has operational characteristics differing from
those of electromechanical equipment. “Safety Guidelines for the
Application, Installation and Maintenance of Solid State Controls”
(Publication SGI-1.1) describes some important differences between
solid state equipment and hard–wired electromechanical devices.
Because of this difference, and also because of the wide variety of
uses for solid state equipment, all persons responsible for applying
this equipment must satisfy themselves that each intended
application of this equipment is acceptable.

In no event will the Allen-Bradley Company be responsible or liable
for indirect or consequential damages resulting from the use or
application of this equipment.

The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and
requirements associated with any particular installation, the
Allen-Bradley Company cannot assume responsibility or liability for
actual use based on the examples and diagrams.

No patent liability is assumed by Allen-Bradley Company with
respect to use of information, circuits, equipment, or software
described in this manual.

Reproduction of the contents of this manual, in whole or in part,
without written permission of the Allen-Bradley Company is
prohibited.

Throughout this manual we use notes to make you aware of safety
considerations.

!

ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage, or economic loss.

Attentions help you:

identify a hazard

avoid the hazard

recognize the consequences

Important: Identifies information that is especially important for

successful application and understanding of the product.

PLC, PLC–2, PLC–3, PLC–5, SLC, SLC 500, PanelView, RediPANEL, Data Highway Plus, and Dataliner are trademarks of
Allen-Bradley Company, Inc.
IBM is a registered trademark of International Business Machines, Incorporated.

Important User Information

Advertising