Mounting the serial communications module – Rockwell Automation 1203 Serial Communications Module Series B User Manual
Page 24
Advertising
2–10
Installation
1203–5.5 September 1995
The Serial Communications Module can be provided in three
mounting configurations:
•
Open style board, factory installed in a drive (not available for all
drives)
•
Open style board as a separate kit
•
Enclosed style for panel mount or DIN rail mount
This section provides mounting information for the Open style kit
and the Enclosed style.
Open Style Communications Module Mounting Location (1336 PLUS
7.5–500HP)
1336 PLUS Main Control Board
TB2
TB1
L OPTION
J7
J9
Human
Interface
Module
J4
Open Serial Communications
Module Mounts Here
Memory
Module
U44
J3
U50
U54 U56
SCANport
Port 6
AB0404C
Mounting screws
& standoffs qty 4
Mounting the Serial
Communications Module
Advertising