Rockwell Automation 1420 PowerMonitor 500 - Manual (Page 21)

Rockwell Automation Publication 1420-UM001D-EN-P - September 2013
21
Installation and Wiring
Chapter 2
Figure 18 - Optional Ethernet Communication (ENT option)
The PowerMonitor 500 unit connects to industry-standard Ethernet hubs and
switches by using standard CAT-5 UTP (unshielded twisted-pair) cables with
RJ45 connectors. Table 3 shows the cable and connector pin assignments.
Ethernet Network Switch Uplink to LAN
PowerMonitor 500 PowerMonitor 500
Table 3 - Ethernet Network Connections
Terminal Signal
1 TX+
2 TX-
3 RX+
4
5
6 RX-
7
8