Rockwell Automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual - Manual (Page 105)

Publication 1734-UM002C-EN-P - July 2003
1734-ADNX Quick Start B-25
7. From the RSNetWorx for DeviceNet main menu, select
File>Save. Now you can observe how you would switch
networks.
Switch Between Networks
1. Move the cursor over the 1734-ADNX in the network browse
window:.
2. Press the right mouse button.
3. Click Associated Network from the menu.
If prompted to save your changes, you must select Yes (you will
probably not get this prompt if you saved earlier).
To get back to the main network, associate the Subnet.dnt
project to MainNetwork.dnt using the following steps:
4. Double click on the 1734-ADNX adapter at Node 16.
5. Click the Device Bridging tab.