Rockwell Automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual - Manual (Page 50)

Publication 1734-UM002C-EN-P - July 2003
3-6 Using Auto Start Mode
5. Slide the safety end cap up to remove it. This exposes the
backplane and power interconnections.
31112-MC
Safety end cap
ATTENTION
Do not discard the safety end cap. Use this end cap
to cover the exposed interconnections on the last
mounting base on the DIN rail. Failure to do so
could result in equipment damage or injury from
electric shock.