Rockwell Automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual - Manual (Page 111)

Publication 1734-UM002C-EN-P - July 2003
1734-ADNX Quick Start B-31
You are now ready to write your RSLogix5000 program.
20. Click Apply.
21. Click Yes when prompted to download these changes to the
device.
22. Click OK to close the 1756-DNB Output tab.
23. Exit RSNetWorx for DeviceNet.
This is not a necessary step, but it will show you that
RSLogix5000 can launch RSNetWorx for DeviceNet
24. When prompted to save, Click Yes.
You have completed the 1734-ADNX Quick Start.