Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 36)

30 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
30 Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application
• Adding I/O modules as children of the 1747-AENTR adapter.
.
Add the Local EtherNet/IP Bridge to the I/O Configuration
1. Right-click the I/O Configuration folder in the project dialog, and choose
New Module from the dropdown list.
The Select Module Type dialog opens.
2. Select the 1756-EN2TR EtherNet/IP Bridge and click Create.
IMPORTANT Click the Help button on the configuration dialogs shown in this
section if you need assistance in selecting and setting the
parameters.