Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual User Manual
Page 53
Advertising
Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
47
Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application 47
1. On the I/O Configuration tree for your project in RSLogix 5000,
right-click the name of your I/O module.
2. Select Properties. The Module Properties dialog appears and has the
following tabs available for configuration.
Note that for certain I/O modules, the Configuration tab may not be
available.
3. Click Change... on the General tab to access the Module Definition dialog
and edit the following information:
• Revision
• Electronic Keying
• Connections
Advertising