Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual User Manual
Page 41
Advertising
Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
35
Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application 35
The New Module dialog opens.
3. Enter values for Name and Slot, noting that we used the following values.
4. Select the Connection tab.
The RPI is selectable since it is a direct connection.
Name
TEST_1746IO8
Slot
1
Advertising