Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 38)

32 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
32 Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application
The Select Module Type dialog opens.
2. Choose 1747-AENTR. Click Create.
3. The Module Properties dialog opens. Specify the properties of the adapter.
Note that for the purposes of illustration we have specified the following
properties in the General tab of the New Module dialog.
Name TEST_1747AENTR
IP Address 10.88.70.2
Slot 0