Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual User Manual
Page 44
Advertising
38
Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
38 Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application
3. Enter a name for the device.
Note that the following values are used in this example.
4. Click Change... on the General tab.
On the Module Definition screen, configure data type as INT,
Input Size = 72 (INTs), Output Size = 72 (INTs). The Input Size should
match the total size of all three Input Chunks. The Output Size should
Field
Value
Name
TEST_1746BASB
Revision
2.1
Electronic Keying
Compatible Module (default)
Connections
Exclusive Owner – Advanced (default)
Advertising