Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 47)

Rockwell Automation Publication 1747-UM076C-EN-E - January 2013 41
Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application 41
– Offset = 0 (starting INT offset in M1 File)
• Input Chunk 3
– Size = 0
– File = <Don’t Care>
– Offset = 0
8. Click OK to save the configuration.
9. On the Controller Organizer window, right-click Controller Tags under
the Controller <name> folder. Select Monitor Tags.
10. Examine the tags created for 1746-BAS/B.
• TEST_1747AENTR:3:I.Data[0-7] represents Input File data (Input
Chunk #1).
• TEST_1747AENTR:3:I.Data[8-71] represents M1 file data (Input
Chunk #2).
• TEST_1747AENTR:3:O.Data[0-7] represents Output File data
(Output Chunk #1).
• TEST_1747AENTR:3:O.Data[8-71] represents M0 file data (Output
Chunk #2).