Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 74)

68 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
Appendix B Adapter Web Dialogs
• Identity
• Network Configuration
• Services
Use the Device Identity Page
To use the Device Identity page to make entries for the device name, device
description, and device location, use this procedure.
1. Click Device Identity from the tab at the top of the page or panel on the
left.
The Identity page opens.
2. From the Identity page, complete entries for the following, noting that the
description and location help you identify where modules are in the
facility:
• Device Name (this is 1747-AENTR by default)
• Device Description
• Device Location
3. Click Apply Changes to save the modified values.
Use the Network Configuration Page
To use the Network Configuration page to make entries for enabling or disabling
DHCP and setting TCP/IP parameters and Ethernet link operation, follow this
procedure.