Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 75)

Rockwell Automation Publication 1747-UM076C-EN-E - January 2013 69
Adapter Web Dialogs Appendix B
1. Click Network Configuration tab at the top of the page or panel on the
left. The Network Configuration page opens.
2. From the Network Configuration page, complete these entries, noting that
values for Network Interface are disabled when DHCP is Dynamic
DHCP and port speed and duplex mode are disabled when Autonegotiate
Speed and Duplex is selected.
• For Initial Network Configuration:
– Ethernet Interface Configuration
- Static
- Dynamic DHCP
• For Network Interface, fill out these fields:
– IP Address
– Subnet Mask
– Gateway Address
– Primary Name Server
– Secondary Name Server
– Domain Name