Chapter 2, Installing the converter, Connecting the cables – Rockwell Automation 1203-USB Converter User Manual
Page 19: Connecting the cables -1, Installing the, Converter
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Chapter
2
Installing the Converter
This chapter provides instructions for installing and removing the
1203-USB converter.
Connecting the Cables
Important: The converter must not be installed in an area where the
ambient atmosphere contains volatile or corrosive gas, vapors
or dust. If the converter is not going to be installed for a period
of time, it must be stored in an area where it will not be exposed
to a corrosive atmosphere.
Only two of the three supplied cables are required to install the 1203-USB
converter between the drive and computer.
For a list of compatible products, see
Compatible Products on page 1-3
Topic
Page
Installing Connected Components Workbench Software
TIP: Always use the USB cable to connect the converter to the computer.