Rockwell Automation 1203-USB Converter - Manual (Page 93)

Use with HyperTerminal Software E-3
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
The Connect To dialog box appears.
5. From the ‘Connect using’ pull-down menu, choose the communications
port noted in step 1 on page E-1 .
6. Click OK to display the COM Properties dialog box.
7. Select the settings shown in the image above.
8. Click OK.
A blank HyperTerminal workspace appears.
9. Press Enter until the main menu appears.
TIP: From the File menu, choose Save to save the HyperTerminal
configuration that you just created. In future connections, you can select the
saved configuration and quickly connect to the 1203-USB converter.
Main Menu - Enter Number for Selection
1 > Display Setup Parameters
2 > Display Event Queue
3 > Flash Upgrade
TIP: If no text or meaningless text appears instead of the Main Menu, it is
possible that a baud rate other than ‘115200’ was selected. See step 6 above.