Rockwell Automation 1203-USB Converter - Manual (Page 74)

C-10 Use with DriveExplorer Software
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
The Network Connection - Node Selection dialog box appears.
3. In the Network Connection - Node Selection dialog box, click Multiple.
4. From the pull-down menu, choose the node address for the first network
drive (for this example, ‘1’).
5. From the pull-down menu, choose the node address for the last network
drive (for this example, ‘2’) to view all drives simultaneously in the
DriveExplorer online window.
6. Click Connect.
The DriveExplorer network treeview appears.
7. Click on each node in the treeview to create its database and identity.
8. Expand each node to display the connected drive and 1203-USB
converter representation.
TIP: If the network drive node address is valid, ‘Online’ is shown next
to the selected address. ‘Offline’ appears if a node address is not valid.
TIP: Representation for the 1203-USB converter appears with each drive
in the treeview—even though there is only one 1203-USB converter on the
network. To access parameters for the 1203-USB converter, click any
Parameter List shown for the 1203-USB in the treeview.