Rockwell Automation 1203-USB Converter - Manual (Page 26)

2-8 Installing the Converter
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
16. Check ‘Include this location in the search’.
17. Click Browse.
Browse to the location on the computer where the executable files for
both USB drivers were unzipped (step 4 in the
Download Both USB
Drivers to the Computer section).
18. Click Next >.
19. After the USB Serial Port driver has been successfully installed, a
confirmation screen appears.
20. Click Finish.
21. Verify that the drivers have been correctly installed by expanding Ports
(COM & LPT) in the Device Manager treeview as shown below.
‘Allen-Bradley 1203-USB (COMx)’ should appear in the treeview. Note
the COM port being used. This COM port number will be used later to
configure a driver using RSLinx software to represent the connection on
the COM port. This is required for either the Connected Components
Workbench or DriveExecutive software tool. See
Using Connected
Components Workbench Software on page 3-2 or, for DriveExecutive
software, Configuring the Converter on page D-2 for details.