Rockwell Automation 1203-USB Converter - Manual (Page 60)

A-2 Specifications
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Environmental
Agency Certification
Important: For the converter to be CE and CTick compliant when
connected to a DSI (PowerFlex 4-Class) drive, the shield of the
drive cable must be terminated as described in the Important
statements on
page 2-3 .
NOTE: This is a product of category C2 according to IEC 61800-3. In a
domestic environment this product may cause radio interference in which
case supplementary mitigation measures may be required.
Temperature
Operating
Storage
0…50 °C (32…122 °F)
-40…85 °C (-40…185 °F)
Relative Humidity 5…95% non-condensing
Atmosphere Important: The converter must not be installed in an area
where the ambient atmosphere contains volatile or corrosive
gas, vapors or dust. If the converter is not going to be
installed for a period of time, it must be stored in an area
where it will not be exposed to a corrosive atmosphere.
Vibration
Operating
Non-Operating
2.5 G @5Hz-2KHz
5 G @5Hz-2KHz
Shock
Operating
Non-Operating
30 G peak acceleration, 11 (±1) ms pulse width
50 G peak acceleration, 11 (±1) ms pulse width
UL UL508C
cUL CAN / CSA C22.2 No. 14-M91
CE EN50178 and EN61800-3
CTick AS / NZS 2064, Group 1, Class A