Rockwell Automation 1203-USB Converter - Manual (Page 99)

PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Appendix F
History of Changes
This appendix summarizes the revisions to this manual. Reference this
appendix if you need information to determine what changes have been
made across multiple revisions. This may be especially useful if you are
deciding to upgrade your hardware or software based on information added
with previous revisions of this manual.
DRIVES-UM001C-EN-P,
September 2012
DRIVES-UM001B-EN-P,
October 2006
Topic Page
DRIVES-UM001C-EN-P, September 2012 F-1
DRIVES-UM001B-EN-P, October 2006 F-1
Change
Reformatted this document from half size (5.5 x 8.5 in.) to full size (8.5 x 11 in.)
Reorganized document so that information about using the Connected Components Workbench
software tool is contained and described in the main part of the document. Information to use the
DriveExplorer, DriveExecutive, and HyperTerminal software tool is now located in respectively titled
appendixes.
Change
In Appendix C in the ‘Performing a Flash Update with DriveExplorer’ section, added an Attention
statement in step 8 to not remove power from the drive during flashing.
In Appendix C in the ‘Performing a Flash Update with DriveExecutive’ section, added an Attention
statement in step 8 to not remove power from the drive during flashing.