Rockwell Automation LDL Ironless Linear Servo Motors User Manual
Page 26
Advertising
26
Publication LDL-UM001A-EN-P - March 2009
Chapter 3 Installing the LDL-Series Linear Motor
4. Verify the gap between the motor and the magnet channel is
0.83
±
0.30 mm (0.033
±
0.011 in.).
Use plastic shim stock and adjust as necessary.
5. Torque the M4 SCHS to 4.6 N•m (3.4 lb•ft) for black oxide steel
screw or 3.10 N•m (2.3 lb•ft) for stainless steel screws.
6. Install the bearing fasterners.
7. Secure the assembly using all the mounting holes.
Shim
Advertising