Rockwell Automation LDL Ironless Linear Servo Motors - Manual (Page 44)

44 Publication LDL-UM001A-EN-P - March 2009
Chapter 6 Configure and Start Up the LDL-Series Linear Motor
6. Using the screen image as a reference, configure the parameters
as shown in the Setting column.
RSLogix 5000 Software Version 15.00 and 16.00 TTL Encoder
RSLogix 5000 Software Version 15.00 and 16.00 Sin/Cos Encoder
Parameter Setting Comment
Feedback Type TTL or Sin/Cos For RSLogix 5000 software,V16
TTL with Hall or Sin/Cos with Hall For RSLogix 5000 software, V17
Cycles 50 5 µm encoder
125 2 µm encoder
250 1 µm encoder
500 0.5 µm encoder
50 20 µm Sin/Cos encoder (1)
(1) Requires custom database file contact Application Engineering at 631.444.6600.
25 40 µm Sin/Cos encoder
per Millimeters –
Interpolation Factor 4 TTL
1024 Sin/Cos