Rockwell Automation LDL Ironless Linear Servo Motors - Manual (Page 46)

46 Publication LDL-UM001A-EN-P - March 2009
Chapter 6 Configure and Start Up the LDL-Series Linear Motor
10. Click OK to set the values.
11. Click the Conversion tab.
12. Using the screen image as a reference, configure the parameters
as shown in the Setting column.
13. Click OK.
Parameter Setting Comment
Positioning Mode Linear –
Conversion Constant 200 5 µm encoder
500 2 µm encoder
1000 1 µm encoder
2000 0.5 µm encoder
51200
20 µm pitch Sin/Cos encoder
(1)
(1) Requires custom database file contact Application Engineering at 631.444.6600.
25600 40 µm pitch Sin/Cos encoder