Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module - Manual (Page 13)

13 Rockwell Automation Publication GMSI10-UM009D-EN-P - June 2011
Chapter
2
Installing the XM-440 Master Relay Module
This chapter discusses how to install and wire the XM-440 Master Relay
Module. It also describes the module indicators and the basic operations of the
module.
For information about See page
XM Installation Requirements 14
Mounting the Terminal Base Unit 21
Connecting Wiring for Your Module 24
Mounting the Module 36
Module Indicators 38
Basic Operations 39
ATTENTION
This equipment is intended for use in a Pollution Degree 2
Industrial environment, in overvoltage Category II applications
(as defined in IED publication 60664–1), at altitudes up to 2000
meters without derating.
This equipment is supplied as “open type” equipment. It must be
mounted within an enclosure that is suitably designed for those
specific environmental conditions that will be present, and
appropriately designed to prevent personal injury resulting from
accessibility to live parts. The interior of the enclosure must be
accessible only by the use of a tool. Subsequent sections of this
publication may contain additional information regarding specific
enclosure type ratings that are required to comply with certain
product safety certifications.
See NEMA Standards publication 250 and IEC publication
60529, as applicable, for explanations of the degrees of
protection provided by different types of enclosures.