Manually resetting relays – Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module User Manual
Page 40
Advertising
Rockwell Automation Publication GMSI10-UM009D-EN-P - June 2011
40 Installing the XM-440 Master Relay Module
Refer to Module Indicators on page 38 for more information about the LED
indicators.
Manually Resetting Relays
The XM-440 has an external reset switch located on top of the module, as
shown in Figure 2.17.
Figure 2.17 Reset Switch
The switch can be used to reset all latched relays in the module. This includes
the relays in the Expansion Relay Module when it is connected to the XM-440.
IMPORTANT
The Reset switch resets the relays only if the input is no
longer in alarm or the condition that caused the alarm is no
longer present.
MASTER RELAY
1440-RMA00-04RC
Press the Reset
Switch to reset the
relays
Advertising