Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module - Manual (Page 54)

Rockwell Automation Publication GMSI10-UM009D-EN-P - June 2011
54 Specifications
Relays
Number
Contacts
Failsafe
Latching
Time Delay
Voting Logic
Reset
Four relays, two sets of contacts each -
DPDT (2 Form C)
Four or eight additional relays when
connected to one or two XM-441 Expansion
Relay modules
250V AC, 50/60 Hz, 3 A Resistive
Normally energized (failsafe), or
Normally de-energized (non-fail-safe)
Latching, or
Non-latching
0 to 25.5 seconds, adjustable in 100msec
increments
Per relay, defined as “A out of B” where “B”
is up to 16 alarms and/or relays from any
XM measurement module(s) on the bus and
“A” is from 1 to “B”
Local reset switch on top of module
Remote reset switch wired to terminal base
Digital reset command via serial or
DeviceNet interface
Power
Module
Consumption
Heat Production
24V DC
200mA maximum
3.4 Watts (11.6 BTU/hr) maximum
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
-20° to +65°C (-4 to +149°F)
-40 to +85°C (-40 to +185°F)
95% non-condensing
All printed circuit boards are conformally coated
in accordance with IPC-A-610C.
Physical
Dimensions
Terminal Screw Torque
Height: 3.8in (97mm)
Width: 3.7in (94mm)
Depth: 3.7in (94mm)
7 pound-inches (0.6Nm)
XM-440 Technical Specifications
Product Feature Specification