Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module - Manual (Page 62)

Rockwell Automation Publication GMSI10-UM009D-EN-P - June 2011
62 DeviceNet Information
XM Status Values
The XM Status values included in the COS messages are defined in the table
below.
Using RSNetWorx with the
XM-440 The XM-440 acts as a DeviceNet master/scanner on the XM network. The
measurement modules are slaves to the XM-440. The XM-440 is an application
specific master, however. This means that it should be used to scan only XM
measurement modules and not other DeviceNet devices.
Generic DeviceNet master/scanner devices can be used to scan any DeviceNet
device, including XM modules. These scanners are configured in RSNetWorx
with the DeviceNet Scanner applet, as shown below.
Relay Status Descriptions
Relay Status Value Description
0 Not Activated
1 Activated