Status display play/record controls – AJA KONA 5.0 User Manual
Page 100
90
Status Display
The Status Display section of the AJA Capture plugin, in the left column, reports the settings
that you have selected for the KONA to use when you have control of it:
•
Primary Format
•
Video Input type
•
Audio Input type
Capture Plugin Status Display
•
In the right column you will see current information for:
•
Capture Status
•
Number of frames successfully captured
•
Number of frames dropped from the capture sequence
Capture Status reports the detected signal status of the KONA input:
•
Off Line – the capture plugin does not control the KONA
•
Idle – Ready, the plugin has control and the proper input signal is present
•
Video Input Not Detected – no input present
•
[format of input detected] – if the input is not a match with the chosen input format, the
mismatched signal format will be displayed here
Play/Record Controls
Standard tape deck icons provide hot buttons for the Play/Record process. They are:
The slider on the bottom is a variable speed forward/reverse control. Positions from left to
right are: (Reverse) 16x, 8x, 4x, 2x, 1/2, 1/4, Still, (Forward) 1/4, 1/2, 2x, 4x, 8x, and 16x. The red
button is for Record.
Rewind (8x)
Fast Forward (8x)
Reverse Play
Reverse 1 frame
Still
Stop
Play (1x)
Forward 1 frame