AJA KONA 5.0 - Manual (Page 60)

50
File Options In the File Options menu you will configure the capture file
you will be creating by setting the following.
Type
The Type pull-down menu provides a choice of video/audio
file formats:
Note: Because the KONA LS is a YUV only device, file types
that require RGB colorspace cannot be used.
• QuickTime Movie
• TGA Sequence
• AVI Movie
• BMP Sequence
• DPX Sequence (KONA 3 & LHi only)
• TIF Sequence
• Cineon (KONA 3 & LHi only)
• YUV Sequence
Video/Audio
Use this pull-down menu to select the video/audio input combination you will capture:
• Video Only
• Audio Only
• Video – (minus) Audio – video and audio are recorded in separate files
• Video + (plus) Audio (QuickTime only) – video and audio are recorded in the same file
The options shown are determined by the selected file format. QuickTime captured audio is
either embedded with the video file or captured to separate .mov files. All other formats
capture audio to Wave Files.
Video Subtype
Video Capture Formats supported by KONA cards (varying according to file type) include:
• 8-bit YUV 4:2:2 – ‘2vuy’
•
8-bit RGBA 4:4:4:4 – ‘rgba’
• 8-bit YUV 4:2:2 – ‘2Vuy’
•
8-bit RGBA 4:4:4:4 – ‘bgra’
• 10-bit YUV 4:2:2 – ‘v210’
•
10-bit Log RGB 4:4:4 – ‘R10g’
• 8-bit RGB 4:4:4 – ‘rgb’
•
10-bit RGB 4:4:4 – ‘R10k’
• 8-bit RGB 4:4:4 – ‘bgr’
•
10-bit RGB 4:4:4 – ‘r10k’
• 8-bit RGBA 4:4:4:4 – ‘argb’
Audio Subtype
Audio Capture Formats supported by KONA cards include:.
• 48 kHz 16-bit PCM Mono
•
48 kHz 16-bit PCM Stereo
• 48 kHz 24-bit PCM Mono
•
48 kHz 24-bit PCM Stereo
• 48 kHz 32-bit PCM Mono
•
48 kHz 32-bit PCM Stereo
KONA 3/3x also supports 96 kHz 16 through 32-bit PCM Mono and Stereo selections