AJA KONA 5.0 - Manual (Page 67)

1
57 Using AJA’s Machina Application — Play Window
Play Controls There are two modes of play control—one for Edit and one for Output. Click the hot buttons at
the top-left of the pane to toggle between the two modes.
Edit Mode – In Edit mode, immediately under the mode toggle buttons are standard tape deck
icons providing hot buttons for the Play process. They are:
Edit Mode Play Controls and Scrub Bar
Below the Play buttons is a Scrub Bar that allows you to click and drag along the loaded
sequence to view individual frames and mark In/Out- points for playback of frame subsets. To
set an in-point, click on the left bracket. To set an out-point, click on the right bracket.
To set an in-point, click on the left-most hot text numeral below the bar and enter the desired
frame number. Similarly, enter the out-point by clicking on the right side hot text numeral.
Note: The “first” or “last” frame may be for the entire sequence or for frames in an in/out-
marked subset. In this case, first, last, in, and out frames become “Most Significant Frames.”
For example, clicking on the Go-to-1st button will move you to the first Most Significant
Frame to the left. Clicking on the Go-to-Next button will move you to the first Most
Significant Frame to the right.
The slider on the bottom is a variable speed forward/reverse control. Positions from left to right
are: (Reverse) 16x, 8x, 4x, 2x, 1/2, 1/4, Still, (Forward) 1/4, 1/2, 2x, 4x, 8x, and 16x.
Go-to-Previous “Most Significant” frame Reverse 1 frame
Rewind (8x) Reverse Play
Still Stop
Play (1x) Fast Forward (8x)
Forward 1 frame Go-to-next “Most Significant” frame
Play Entire Clip or Marked Segment
Play Mode Arrow