Use as background video, Capture controls – AJA KONA 5.0 User Manual
Page 63
1
53
Using AJA’s Machina Application — Setup Window
Use as Background Video
Check this box to place the Graphic File on the Background layer and place the motion video in
the foreground layer.
Capture Controls
Standard tape deck icons provide hot buttons for the Capture process. They are:
The slider on the bottom is a variable speed forward/reverse control. Positions from left to right
are: (Reverse) 16x, 8x, 4x, 2x, 1/2, 1/4, Still, (Forward) 1/4, 1/2, 2x, 4x, 8x, and 16x.
The red button is for Record.
Machina Capture Controls
The toggle buttons on the top-left step through one of three capture modes:
•
Capture Now – manual record/stop (“crash”) capture
•
Capture Duration – capture a specified number of frames after manual start, based on the
timebase of the selected Primary Format
•
Capture In/Out – initiate and end capture using timecode-based in and out settings
The selected mode will activate the appropriate hot text for that mode (to the right of the
Capture Mode selection). Click the hot text to enter a timecode value
(hours:minutes:seconds:frames). The bottom display indicates the current machine status and
timecode from the VTR.
Rewind (8x)
Fast Forward (8x)
Reverse Play
Reverse 1 frame
Still
Stop
Play (1x)
Forward 1 frame
Capture Mode
VTR Status
KONA Status
Capture Time Entry Fields