AJA KONA 5.0 User Manual
Page 44
34
To do a down-conversion on an HD input (KONA 3 and LHi models):
•
Set the Primary Format as an SD format
•
Select the correct HD format with an (I) input designation for the Secondary Format,
then
•
Choose a “– Secondary” Video Input type
To do an up-conversion on an SD project for HD output (KONA 3 and LHi):
•
Set the Primary Format as an SD format
•
Select the correct HD format with an (O) output designation for the Secondary Format,
then
•
Choose a “– Secondary” SDI1/2 Output type and an HD Analog Output
Down-conversion display mode choices that may be available include (KONA 3 and LHi):
•
Anamorphic: full-screen
•
Letterbox: image is reduced with black top and bottom added to image area with the
aspect ratio preserved
•
Crop: image is cropped horizontally to fit new screen size
Up-conversion display mode choices that may be available include (KONA 3 and LHi):
•
Anamorphic: full-screen
•
Pillarbox 4x3
•
Zoom 14x9
•
Zoom Letterbox
•
Zoom Wide
For Cross-conversion (KONA 3 models):
•
Set the Primary Format as an HD format (what you want the input converted to)
•
Select the correct input HD format with an (I) input designation for the Secondary
Format
KONA 3 cross-conversion allows you to convert from one format of HD to another, such as
1080i @ 29.97 to 720p @ 59.94. KONA 3 does not perform 2K to HD cross-convert, but can
display a cropped cut of the 2K on an HD monitor. In addition to HD-to-HD cross-
conversion, KONA 3 also can perform SD to SD hardware based aspect-ratio conversion for
capture and output. This is controlled the same as all other up/down/cross-conversions. Use
it by selecting a ‘Secondary Video Format’ that matches the ‘Primary Video Format’ and
then specifying the conversion using the ‘Convert Mode’ control.