Print-to-video mode, Status display – AJA KONA 5.0 User Manual
Page 109
1
99
Using Adobe CS5 Applications — Using the After Effects Playback Plugin
Print-to-Video Mode
This mode allows you to manually put a clip to tape using the VTR’s current position. You have
the option of adding Delay frames. KONA will wait this many frames after the tape machine start
command before outputting the clip. The Duration Field displays the total length of the clip that
will go to tape. Click on the green hot button to launch the output sequence.
Play Controls for Print-To-Video
Status Display
The Status Display section above the Playback screen reports the settings that you have
selected for the KONA you are controlling:
•
Primary Format
•
Analog Output type
In the right column you will also see current information for:
•
Playback Status: Stop, Still, Playing
Frames Dropped: a live frame count display followed by a total count of any frames dropped
from the sequence in parens ( )