AJA KONA 5.0 - Manual (Page 90)

80
The Status Display section of the Photoshop Capture plugin, in the left column, reports the
settings that you have selected for the KONA to use when you have control of it:
• Primary Format
• Video Input type
• Selected Colorspace
In the right column Capture Status reports the detected signal status of the KONA input:
Off Line – the capture plugin does not control the KONA
Idle – Ready, the plugin has control and the proper input signal is present
Video Input Not Detected – no input present
Play/Record
Controls Standard tape deck icons provide hot buttons for the Play/Record RS-422 machine control of a
source VTR. They are:
The slider on the bottom is a variable speed forward/reverse control. Positions from left to
right are: (Reverse) 16x, 8x, 4x, 2x, 1/2, 1/4, Still, (Forward) 1/4, 1/2, 2x, 4x, 8x, and 16x. The red
Record button is used to initiate a capture.
Photoshop Capture Window Play/Record Controls
The pull-down menu on the right enables one of two capture modes:
• Capture Now – manual record/stop (“crash”) capture
• Capture In/Out – initiate a capture using timecode-based in or out settings
The selected mode will activate the appropriate hot text for that mode. Clicking the hot text
brings up and entry field (hours:minutes:seconds:frames). The upper left display indicates the
current timecode from the VTR.
Rewind (8x) Fast Forward (8x)
Reverse Play Reverse 1 frame
Still Stop
Play (1x) Forward 1 frame