AJA KONA 5.0 - Manual (Page 21)

1
11 Introduction — Cable Connections
Using Breakout
Boxes The KONA product line offers two optional 19” 1RU rack-mountable breakout boxes that attach
to the KONA card via cables that connect to the back of the Box. These cables are supplied with
the Box. The breakout boxes offer the same inputs and outputs as the standard breakout cables
and more. Breakout boxes can be easily rackmounted or placed on top of a broadcast monitor
or editing desk.
KONA KL-Box for LSe
The KONA KL-Box is connected via one 60-pin to 60-pin, and one 3-BNC to 3-BNC cable. When
you purchase the KL-Box, you get two-channel unbalanced audio output (2 RCA Jacks) not
available with the standard cable. When ordering a KL-Box, specify the KONA card model you’ll
be using the KL box with to ensure you get the proper cable set.
KL-Box Model Breakout Box
KONA KLHi-Box for LHi Cards
The KONA KLHi-Box offers the same connections as the KL-Box except a single connector is
provided for the following: SDI input, SDI output, HDMI v1.3a input, and HDMI v1.3a output.
Note: The HDMI connectors on the breakout box are full-size, not mini as on the LHi endplate.
KLHi-Box Model Breakout Box
RS422
Machine
Control
External
Reference
(loop) Analog Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/
Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out
In
Serial
Digital
Out
Serial
Digital
RS422
Machine Control
External
Ref. or LTC
(loop)
Analog
Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out SDI
In
SDI
Out
HDMI v1.3a
Out
HDMI v1.3a
In