Clip options – AJA KONA 5.0 User Manual
Page 98
88
Type
The Type pull-down menu provides a choice of video/audio file formats:
•
QuickTime Movie•
•
TGA Sequence
•
AVI Movie (not supported in Mac)
•
BMP Sequence
•
TIF SequenceYUV Sequence (8-bit only)
Capture
Use the Capture pull-down menu to select the video/audio input combination you
will capture:
•
Video Only
•
Audio Only
•
Video - (minus) Audio – video and audio are recorded in separate files
•
Video + (plus) Audio (QuickTime only) – video and audio are recorded in the same file
Note: The options shown are determined by the file format selected. QuickTime captured
audio is either embedded with the video file or captured to separate .mov files. All other
formats capture audio to Wave Files.
Video Format
Video Capture Formats supported by KONA include:
•
8-bit YUV 4:2:2 – ‘2vuy’
•
8-bit YUV 4:2:2 – ‘2Vuy’
•
10-bit YUV 4:2:2 – ‘v210’
Audio Format
Audio Capture Formats supported by KONA include:.
•
48 kHz 16-bit PCM Mono•
•
48 kHz 16-bit PCM Stereo
•
48 kHz 24-bit PCM Mono•
•
48 kHz 24-bit PCM Stereo
•
48 kHz 32-bit PCM Mono•
•
48 kHz 32-bit PCM Stereo
Audio Tracks
Select the number of audio tracks for this project.
Clip Options
Clip Name
In the Clip Options menu, click on the Clip Name hot-text to name the file you
will be creating. Subsequent capture file numbers will increment from this one.
Reel Name
Click on the hot-text field to enter a source tape name (the name of the tape on
the VTR). Only QuickTime and DPX files store this information.
Sequence Offset
When capturing file-per-frame sequences, after naming a file, you can set
a Sequence Offset number that will determine the beginning number of the file sequence.
Create New Folder Per Sequence
A check-box is provided to enable this automatic
function. When you check this selection, After Effects CS5
will gather each frame capture
sequence in a new folder, based on clip names, on your disk. (Not applicable to QuickTime or
AVI movie files.)
Import Clip After Capture
This function imports the completed capture file into After
Effects CS5 Project window.