Baumfolder 714XA - Manual (Page 17)

PAGE 14 TP10583
4.0 BAUMFOLDER 714XA “QUICK START” INSTRUCTIONS
1. Turn on Main Power switch on left side of the enclosure.
The display should show a
Baumfolder information screen
for 15 seconds and then automati
cally switches to the
Production Screen:
Production Screen with NO BATCH Production Screen with Batch
2.
The Active fold type is shown in the upper left corner of the screen of the production screen. Press this
image to change to a different fold type. This changes to the
Fold Choice screen.
The selected
fold choice will be in color. Press a different icon to change. If the half fold is chosen, there will be a
choice of pan 1 or pan 2.
3. The NEXT button changes the screen to the
Length screen.
The active units will have a blue
background. Press the units with the gray backgroud to change units. The standard sizes for
metric will be shown when mm is shown in blue; the standard inch sized paper will be shown
when the inch has the blue background. The blue background indicates currently selected size.
To change to a different size, press a new standard size with a gray back gound or if you would
prefer a non-standard size, enter the value directly into the bottom numeric entry.