Baumfolder 714XA - Manual (Page 18)

PAGE 15 TP10583
Here is an example of the
Length Screen:
After selecting the units and the paper size, Press the NEXT button to change to the
INITIALIZATION SCREEN:
4. After changing to the initialization screen, both pans will move into the deflect position then
back out to the fold position
. While the pans are moving the status icon for
the pans moving will display:
After the pans have reached the requested fold positon, the PANS AT FOLD POSITION
message will appear. You then have a choice of returning to the production screen to
run the job using the or chosing the COUNT SETUP button to change the
batch count or mode.
5. There are several ways to get to the
BATCH COUNT
screen. From the
production screen, press the Batch Screen button if the mode is currently set for NO BATCH.
(See the picture labeled NO BATCH on page 14 item one). If the current mode is set for BATCH
then press any of the numbers to the right of the blue batch icons:
OR